Wall sticker instructions
With these wall sticker instructions from ELLIE Studio, you can easily apply your wallpaper circle or arch yourself. Our wall stickers are made of high-quality polymer vinyl with a subtle LINO texture and are self-adhesive. With proper preparation and working slowly, you will achieve a smooth result without bubbles.
Step 1. Prepare
What do you need?
- A soft cloth or towel
- Optionally, a plastic squeegee or old bank card
- Measuring tape and pencil
- Spirit level or painter's tape
- Scissors or utility knife
Preparation of the wall:
- Ensure the wall is flat, clean, dry, and grease-free.
- Our wall stickers are made of high-quality polymer vinyl and adhere to the wall increasingly better over time.
- Not suitable for rough walls, textured plaster, or highly porous substrates.
- Do not apply wall stickers to freshly painted walls. Wait at least 2 weeks.
''A sturdy and well-finished surface ensures the best result. With light wall stickers on a dark wall, show-through may occur.
Step 2. Determine location and align
- Determine where you want to place the wall sticker
- Hold the sticker against the wall or measure the position.
- Use a spirit level or painter's tape to determine the correct height and position.
- Preferably work with two people. One holds the sticker, the other sticks it on.
→ Tip: always start by positioning carefully. A good start prevents crooked sticking.
Step 3. Pasting the wall sticker
- Carefully remove a small part of the paper from the back of the sticker.
- Start at the top left or right
- Stick the top of the sticker to the wall.
- Pull away the paper from the back step by step while smoothing out the sticker.
- Always rub from the inside out to prevent air bubbles.
- Use your hands or a soft squeegee
Work calmly and take your time. The more evenly you stick, the neater the end result.
Step 4. Press and check
- Press the wall sticker down firmly with a soft cloth.
- Check if all edges are securely attached.
- Do you see a small air bubble? Carefully prick a hole in it with a needle and press the air out.
- After application, leave the wall sticker undisturbed for at least 24 hours so that the adhesive layer can bond properly. If necessary, gently press the sticker down again with a soft cloth.
Remove wall sticker
Do you want to remove the wall sticker? Always do this carefully and without haste.
- Gently heat the sticker with a hairdryer. This softens the adhesive layer, making it release more easily.
- For fragile or loose paint layers, we advise extra caution when removing them.
- Pull the sticker off the wall slowly and evenly.
- Preferably pull at an oblique angle and not straight forward.
Tips and tricks for the best results
- Apply the wall sticker at room temperature between 18 and 22 degrees.
- Avoid drafts and direct sunlight during application.
- Work calmly and without haste
- Always use a soft cloth to prevent damage.
- Do not stick onto fiberglass wallpaper without first applying an even layer of wall paint.
Frequently asked questions about applying wall stickers
Can I reposition a wall sticker?
→ Yes, as long as the sticker hasn't been stuck for long (minutes), you can carefully peel it off and reapply it, but do this slowly to prevent stretching.
Can I remove the wall sticker later?
→ Yes, our wall stickers are removable. However, please keep in mind that the material will adhere more strongly to the wall over time. When removing, we recommend first gently heating the sticker with a hairdryer and slowly pulling it off.
I see small air bubbles, what now?
→ Small air bubbles often disappear on their own. If they persist, carefully prick them with a needle.
What surface can I stick on?
→ On smooth, clean, and dry walls. Not suitable for rough or heavily textured walls.
